How to Repair Screen Door

The Screen mobile Company is an ultimate leading in screen door repair and replacements needs. It provides professional services and free estimates of fair bargains. The company deals with a wide set of repair needs such as bent door frames. There is a wide variety of techniques employed by the company to fix the damaged doors, as well as installing a band new screen door. In the case of replacing the damaged door, the company offers different types screen doors such as slinging screen door and retractable screen door. These doors can also be used for installation purposes in case a client would prefer to change their damaged doors. Other types of doors available at the company include the French screen doors and garage screen door.

Screen Door Repair How to Repair Screen Door
Repair Screen Door

Screen mobile has a set of specific tools used for screen door repair. These include fiberglass screen, screen installation tool, a razor blade and a pair of scissors.th pair of scissors are used for cutting the roll of screen while the razor blade is used or trimming the screen close to the plastic spline. Arguably, the fiberglass screen is more effective than a metal screen because it is easy to work with, inexpensive and does not dent. A plastic spline is also required in case the existing one is not easy to remove or breaks during the time of removal.

There is a set of procedural steps to follow win removing the existing plastic spline. A small screwdriver is used to pry up and remove the old spline. If the spline is in good shape and comes out intact, it can still be reused. However, if the spline needs replacement then a new vinyl spline material of proper color and width is used with the frame. After, the existing plastic is removed then the old screen material can be removed. The screen installation tool is also used in the screen door repair. It has two rollers, one on each side, one convex and the other concave. Metal screen installation tool uses both ends for different purposes. The convex roller end is used in pressing the metal screen into the frame groove and the concave end is used to press the plastic spline into the frame groove.

On the contrary, a fiberglass only uses the concave roller end to press the plastic spline into the frame groove. This is because a fiberglass is so thin and more pliable than a metal screen. When screen door repair it is recommended that the screen door is cut into a working size to get rid of the excess screen material. After which, the replacement screens should be roll out down the length of the screen door, leaving about 2 inch on each side. He screen should be trimmed so that it is slightly larger than the rove track that contains the plastic spline. The screen is further trimmed once the retainer plastic spline is fully installed. The aforementioned facts are some of the basic procedural steps involved in effectively screen door repair.

, , , Screen Door

One thought on “How to Repair Screen Door

  1. Pingback: How to Fix Sliding Glass Door Rollers | Glass Sliding Doors

Leave a Comment

Your email address will not be published. Required fields are marked *